Kraft Foods Uses Graphical System Design for Intelligent Machine Fault Detection and Analysis of Easy Mac and Coffee Packaging Lines

 Read in  |   Print

"The LabVIEW graphical system design environment was a key component to this application because it allowed for rapid development of the real-time detection and analysis platform. "

- Alok Sarwal, Handeportal Systems

The Challenge:
Developing advanced fault-detection diagnostic and servicing tools to maximize production line performance and reduce equipment downtime.

The Solution:
Using NI LabVIEW and off-the-shelf hardware components from National Instruments to design a diagnostic tool for packaging machinery.

Alok Sarwal - Handeportal Systems

Machine malfunctions, slowdowns, and other inefficiencies are problems that plague all production lines. The speed of these machines makes it difficult to isolate problems and the origins of machine jams and other unexpected stoppages are often misinterpreted by line operators and can go unrecorded and uncharacterized. One problem or malfunction leads to another in a multi-stage system, creating a domino effect and making the original issue difficult to identify. Additionally, problems may be irregular or develop over a long period of time, making it hard to determine what went wrong.

To solve this problem, researchers at the worlds leading food and beverage company developed the Remote Observer of Manufacturing Equipment (ROME), a solution that actually reconstructs the events that lead to system failure. Similar to the black box flight recorders used on aircraft, ROME is a diagnostic tool designed to support food and beverage machinery. It combines signal-data and video using multiple cameras and provides an integrated time-stamped data bundle.

ROME is the result of our Advanced Manufacturing Systems (AMS) approach developed by researchers to address the problem of reduced equipment efficiency by creating advanced diagnostic and servicing tools to maximize line performance and reduce downtime. ROME provides all the necessary instruments for collecting adequate video, digital, and analog data as well as the tools required for analyzing this data in order to diagnose serious problems such as high-speed equipment stoppages, slowdowns, or production-line inefficiencies.

The ROME system includes at least two high-resolution color video cameras that are scene specific and acquire data at 30 to 60 frames per second. ROME can accept up to 265 digital inputs (optically insulated input voltage from five to 250 VDC/VAC). ROME also accepts 16 analog signals of 4-20mA (12-bit resolution). The system has a real-time clock and is designed with no outputs to eliminate the possibility of influencing the operation of a machine’s control system.

High-speed frame grabbers give ROME the power to capture up to 10 seconds of video once a digital trigger, or fault, is detected for post-analysis. ROME can continuously capture data for up to 80 independent 10-second “events” with a 10 second buffer; meaning at any given time the previous 10 seconds of data is preserved. Also, ROME can monitor machinery equipped with any type/brand of programmable logic controller (PLC). The original ROME system has been upgraded to the ROME-2. Both applications were developed by Handeportal Systems.

A prototype of ROME-2 was developed, tested in a laboratory, and installed on actual production lines. This system continues to provide benefit to the various production lines and is now considered a mainstream fault-detection and fault-diagnostic tool that is increasing overall equipment efficiency.

For this system we chose off-the-shelf hardware components from National Instruments and were able to develop the prototype system for about $20,000. The original development was done by consultants with expertise specifically in real-time programming of data-acquisition and vision-equipped robotics. Since a physical interface can be disruptive to the production line, a custom interface was developed for ROME-2. In order to provide a noninvasive mechanism for ROME, the data-acquisition signals are transmitted in a multiplexed manner to detect high-speed digital triggers from high-resolution LEDs on plant control equipment.

Finally, the addition of a FireWire® hard-drive supports a hot-swappable storage resource that can archive numerous sequences of fault triggers and allows the plant floor staff to hot-swap the drive and perform data-analysis and fault detection. The overall plan for this tool is to provide significant cost-savings by reducing down-time and supporting the concept of predictive maintenance.

The LabVIEW graphical system design environment was also a  key component to this application because it allowed for rapid development of the real-time detection and analysis platform. Because NI LabVIEW can easily target various operating systems, we were able to prototype within the Microsoft Windows environment and deploy on the real-time OS within NI PXI embedded controllers. COTS hardware from National Instruments offered standards-based hardware that supported deployment in ruggedized manufacturing environments. Moreover, the technical support provided by field engineers and product experts was helpful in resolving problems specific to this application.

Post Processing

Meticulous post-processing of the events captured by ROME is handled by an X86 Microsoft .NET application based program called DataViewer. Its user-friendly GUI permits step-by-step analysis of video frames synchronized with signal data from the event data-buffer.

Multiple resolutions are available and users can define a set of signals of interest to view in the time window. This application is distributed to all analysts at a particular plant. While users can utilize off-line analysis to understand why a machine is not operating at full capability under certain conditions or operates differently at different time periods, they can also use on-line collection to make comparisons between a baseline system running at optimal performance and one that indicates faulty behavior. Such reference-based, or finger-print, comparisons provide an efficient means of predicting faults that could otherwise be quite difficult to determine.

FireWire is a trademark of Apple Computer, Inc., registered in the U.S. and other countries.

Author Information:
Alok Sarwal
Handeportal Systems
Tel: 303-683-2509

Bookmark and Share

Explore the NI Developer Community

Discover and collaborate on the latest example code and tutorials with a worldwide community of engineers and scientists.

‌Check‌ out‌ the‌ NI‌ Community

Who is National Instruments?

National Instruments provides a graphical system design platform for test, control, and embedded design applications that is transforming the way engineers and scientists design, prototype, and deploy systems.

‌Learn‌ more‌ about‌ NI