Bronkhorst FLOW-BUS Controller
Certified LabVIEW Plug and Play (project-style) Instrument Driver
Driver Specifications | |
Manufacturer(s): | Bronkhorst High-Tech |
Interface(s): |
Serial |
Instrument Type(s): |
Controller |
Driver Version: |
1.2 |
Original Release Date: |
20-JAN-2014 |
Update Release Date |
19-FEB-2019 |
Other Supported Models: |
See Below |
NI Certified? |
Yes |
NI Supported? |
Yes |
Driver Ratings: |
11 Ratings | 4.91 out of 5 |
- Plug and Play Driver Installation Instructions Learn how to install your Plug and Play instrument driver
- Note: All FLOW-BUS instruments and instruments with RS232 communication are supported, with the following limitations:
- RS232/FLOW-BUS interface, firmware >= 4.09
- Digital mass flow meters/controllers without RS232 communication: firmware >= V5.xx
- Digital readout control modules (E-7000): firmware >= V3.xx
Download Driver and Related Software
| Application Development Environment | Minimum Software Required | |
|---|---|---|
| LabVIEW 2011 Upgrade | NI-VISA 5.4 | Login to Download |
| LabVIEW 2015 Upgrade | NI-VISA 5.4 | Login to Download |
| LabVIEW 2016 Upgrade | NI-VISA 5.4 | Login to Download |
| LabVIEW 2017 Upgrade | NI-VISA 5.4 | Login to Download |
| LabVIEW 2018 Upgrade | NI-VISA 5.4 | Login to Download |
| LabVIEW 2021 Upgrade | NI-VISA 5.4 | Login to Download |
Models Supported by this Driver
| Models | Tested? | Description |
|---|---|---|
| FLOW-BUS (RS232/RS485) | Digital mass flow meters/controllers |
Next Steps
Rate this Driver
Learn More
Interface Type (optional)
What Interface Are You Using?
In order to help us prioritize future development, please select the primary interface you intend to use with this driver:
